Epoxy color sand floor coating->handbag accessories

Join

Help

Jiangmen Kasole Building Materials Co., LTD.

	Recommended Results

Epoxy color sand floor coating

Category :

Textiles and clothing->Accessories->handbag accessories

Product Specification

Country	CN
Packing	barrel
Payment Term	L/C

Product Detail

Product Overview: 
Caisha Epoxy Floor is a new type of composite composite flooring seamlessly integrated with colored quartz sand and epoxy resin. It is freely matched with one or more different colored quartz sands to form a rich and colorful decoration. Colors and patterns have the advantages of elegant decorative texture, abrasion resistance, pressure resistance, chemical resistance, anti-skid, fireproof, waterproof, etc. It is not only used in industrial flooring, but also used in commercial and civil construction flooring, in recent years Europe and the United States and other developed countries are very popular, known as the "color sand seamless hard carpet." 
Applicable place: 
1. Electronic communication, medical and health, food and health processing workshops; 
2. Large warehouse or warehousing of processing industry, manufacturing industry and large supermarket shopping malls; 
3, large shopping malls, exhibition halls and other occasions; 
4, senior officials and residential buildings, public places, government buildings and commercial buildings; 
5. Repair and reconstruct the old ground, and perform direct operations on the original ground. 
Product Features: 
1, rich colors, strong texture, highly modern style; 
2, high strength, hardness, with excellent wear resistance; 
3, quartz sand integrated molding, with anti-stress, impact resistance and other excellent performance; 
4, flat and seamless, clean and dustproof, its watertight surface can withstand high pressure flushing or steam cleaning, easy to clean and maintain; 
5. Can be made glossy or matte on request, with outstanding anti-slip function 
6, excellent water resistance, waterproof, acid and other chemical properties. 
Construction Program: 
1) Base surface treatment: 
1. Grinding the ground full range with a grinding machine 
2. Hand-grinding machine for corners that can not be ground by the local grinding machine; 
3. The surface of the ground surface that has been ground is cleaned. The dust is cleaned by the sweeper to ensure that the base surface is free from dust, grease, and other contaminants and iron, nail, steel, and other metals; 
4. After cleaning the base surface clean, check whether the base has cracks or empty shells. If any, you must use deep-layer cutting and cleaning to fill with epoxy mortar. When cleaning, do not beat wildly to avoid knocking on the loose side of the base layer. 
2) Epoxy primer coating 
After the substrate treatment, super penetrant epoxy primer coating is applied at the same time. Attention must be paid to the balance between the construction schedule and the materials used during the construction of the ingredients. Do not make too much material at one time to ensure that the materials are still in service at the time of painting. It is brushed before gelation to allow good permeability of the material, ensuring adhesion performance, and evenly throwing 40#-60# colored sand on the surface before gelling (within 30 minutes after coating). 
3) Epoxy mortar coating 
After the primer is dry on the surface, the epoxide mortar has been mixed and mixed in proportion (mixed ratio: epoxy resin mortar: color quartz sand crucible 1:8), and the mechanical leveling machine is used to construct the leveling mortar. Layer to achieve a preliminary leveling. 
4) Epoxy top coat 
On a uniformly closed surface, roll-coating a wear-resistant varnish topcoat twice. To achieve the ultimate requirements of beautiful appearance. The environmental requirements for painting construction: The construction base surface should be kept clean, and there should be no other cross-project construction work. 
5) On-site cleaning and maintenance, floor maintenance 

After completion of surface coating, the relevant construction materials and tools shall be removed from the site, and the surface shall be sealed and protected completely. At least 24 hours later, the person is allowed to walk. It is not possible to bring in sand. It usually takes 7 days for the paint film to completely cure. During this period, other engineering construction, handling and installation should be avoided.


 


kasole-paint.com

More Products from this Supplier

Light grey epoxy flat coating

Ecological microlite art floor

Yellow epoxy self-leveling floor

Light gray non-metallic aggregate


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.

ID:

Password:

Remember my ID on this computer


	Complete this form below to send out your enquiries. All enquiries will be automatically sent to the company you want to develop.

	Subject
	Content	(Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)

Company Profile:

* Company Name

*E-mail

*Country

*Contact Person

URL

*Phone

- -

Fax

- -

*Postal code

*City

*Street Address

*Business Nature

Distributor Exporter Importer Manufacturer
Whole Sale Retailer Reseller Retrofitter User
Others, please specify:

*Security Code


Enter the security code.