Primary color metal floor hardener->handbag accessories

Join

Help

Jiangmen Kasole Building Materials Co., LTD.

	Recommended Results

Primary color metal floor hardener

Category :

Textiles and clothing->Accessories->handbag accessories

Product Specification

Model No:	KS-H110

Country	CN
Brand	Kasole
Payment Term	L/C

Product Detail

Primary metal ground hardener is a new type of industrial floor. It uses wear-resistant aggregate, such as metal and non-metal, combined with a variety of external hardener components, and solidifies with the newly cast concrete layer to form compact and wear-resistant. Shock resistant smooth surface. Widely used in heavy machinery production workshops, dust resistant, wear resistant, moisture-proof workplace. Suitable for wear resistant impact and reduce ash raising ground, such as: warehouse, wharf, workshop, parking lot, Floor of workshop, garage, warehouse, etc.


Performance characteristics


1, impact resistance, heavy pressure resistance, good mechanical properties;


2, dustproof, mildew proof, wear-resistant, good hardness;


3, anti-pressure, strong wear resistance, no dust, enhance the ground oil resistance, anti-penetration;


4, the appearance is smooth and bright, the color is diverse;


5, easy to clean, easy to maintain.


durable years


Synchronize with concrete floor


Basic requirements:


The strength requirement of the base concrete is above C25, the ratio of water to cement is below 0.50, the concrete collapse drop should be controlled at 70-100 mm, the concrete mixture should reduce the segregation and control the bleeding as much as possible. In order to ensure that the concrete mixture has sufficient fluidity and is conducive to construction, it is suggested that concrete should be added with appropriate admixture. The base concrete should be poured and vibrated according to the standard of fine concrete. Pay attention to size and reduce the production of floating slurry. If the surface of hardener is constructed at the same time with the concrete structure layer, if it is necessary to construct the leveling layer at the same time, it is recommended that the flat story concrete be made of fine stone concrete with a thickness of not less than 50 mm, and consideration be given to collocation and extension. Special attention should be paid to the edge and corner part of the base concrete construction block in order to ensure the concrete vibration and compactness in the concrete construction block, and the extra strengthening treatment should be taken.


construction technology


Surface treatment: use a mechanical trowel mounted on the disk to evenly remove the floating slurry layer on the concrete surface; The first spreading Emery wear-resistant floor material: the specified amount of 2/3 hardened and wear-resistant floor material was evenly distributed on the concrete surface at the initial setting stage and then polished with a low speed leveling machine;


Leveling: use 6 meters to scratch evenly the Emery abrasion-resistant floor material along the horizontal, longitudinal direction scraping and rough leveling; The second spreading material: uniform distribution of 1/3 color Emery wear-resistant floor material (after the first grinding surface of the Emery wear-resistant floor material, polished with a leveling machine again; " Surface polishing: according to the hardening of concrete, adjust the angle of the blade on the polishing machine, the opposite layer polishing to ensure the surface smoothness and finish; base surface expansion: Emery wear resistant floor in 4 hours after the completion of construction, Maintenance should be carried out on the surface to prevent rapid evaporation of water on the surface and to ensure A steady increase in the strength of the Emery-resistant floor.


<img src="http://i.bosscdn.com/product/94/03/c7/5905ab8bfdcfc3b4986096985f.png" title="Non Metallic" alt="Non Metallic" /> 

kasole-paint.com

More Products from this Supplier

Tin titanium alloy wear floor

Water-based epoxy floor paint

Solvent transparent epoxy varnish

Imported chrome green metal surface hardener


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.

ID:

Password:

Remember my ID on this computer


	Complete this form below to send out your enquiries. All enquiries will be automatically sent to the company you want to develop.

	Subject
	Content	(Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)

Company Profile:

* Company Name

*E-mail

*Country

*Contact Person

URL

*Phone

- -

Fax

- -

*Postal code

*City

*Street Address

*Business Nature

Distributor Exporter Importer Manufacturer
Whole Sale Retailer Reseller Retrofitter User
Others, please specify:

*Security Code


Enter the security code.