rtv2 silicone rubber raw material for 3D rapid prototype mold making->Silicone

Join

Help

Dongguan Guochuang Organic Silicone Material CO.,LTD

	Recommended Results

rtv2 silicone rubber raw material for 3D rapid prototype mold making

Category :

Energy and raw material->Others->Silicone

rtv2 silicone rubber raw material for 3D rapid prototype mold making

Product Specification

Model No:	C-825

Country	CN
Brand	Guochuang silicone
Materials	liquid silicone rubber
Color	translucent
Packing	1KG/5KGS /10KGS /20KGS /25KGS /200KGS /drum
Minimum Order	200KG
Payment Term	3~5 days after payment
Hardness	25 shore a
mixing ratio	100:2
feature	rapid cure easy operation detail duplication

Product Detail

Description of silicone rubber raw material for rapid prototype mold making
Silicone rubber is condensation cure silicone rubber for mold making. The silicone rubber will be cured under room temperature, It is two components. Part A is a flowable liquid silicone , part B is the catalyst. It has an exceptional fluidity and good operability.

Characteristics of silicone rubber raw material for rapid prototype mold making
An exceptional fluidity and good operability, easy to demold
Good tensile strength and tear strength
soft hardness
copy detailed pattern
good flexibility
eco friendly
long shelf time &lifetime

Application of silicone rubber raw material for rapid prototype mold making
Architectural Restoration
Sculpting Wax Casting
Concrete GRC Casting
Gypsum Plaster Decoration
Polyester Resin Crafts Molding
Furniture Molding
Candles MoldmaKing
Soaps MoldmaKing
Tire Molding
Rapid Prototyping Urethane casting
Detailed reproduction of figurines, art objects and similar items
Using instructions of silicone rubber raw material for 3D rapid prototype mold making
Step one prepare and clean the prototype.
You must make sure your original molds perfect. fix the original mold on a board , then using some assistant material to make a frame for to surround the prototype. The frame is no need ,if we make the mold by brushing way .

Step two Take the silicone and catalyst as the ratio ,mix the silicone rubber and catalyst evenly.
Notes: Molding silicon rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will bring troubles for your final operation. What is more, the finished molds will have a short life. All of these will cause a waste of silicon rubber.

Step three Vacuum pumping
After mixed the silicone evenly, it is better to release the bubble by Vacuum pumping.

Step four Pouring cast or brushing cast
After released the bubble, we can pour brush the silicone rubber on the prototype
Notes Please finished all the steped within the operation time .If not it will cause cross linking reaction, and no more further steps will be available.So,we have to pay attention to the pot life and curing time.

More Products from this Supplier

platinum cure liquid rtv2 rubber for sculpture statue mould casting


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.

ID:

Password:

Remember my ID on this computer


	Complete this form below to send out your enquiries. All enquiries will be automatically sent to the company you want to develop.

	Subject
	Content	(Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)

Company Profile:

* Company Name

*E-mail

*Country

*Contact Person

URL

*Phone

- -

Fax

- -

*Postal code

*City

*Street Address

*Business Nature

Distributor Exporter Importer Manufacturer
Whole Sale Retailer Reseller Retrofitter User
Others, please specify:

*Security Code


Enter the security code.