HOT SALE and professional WNS series industrial steam boiler design->gas boiler

Join

Help

Xinda boiler container Co.,Ltd

Home

	Recommended Results

HOT SALE and professional WNS series industrial steam boiler design

Category :

Machinery on-line->Boilers->Other->gas boiler

HOT SALE and professional WNS series industrial steam boiler design

Product Specification

Model No:	WNS

Country	0
Brand	XDZ
Materials	Q345R boiler steel plate and stainless steel
Size	450023002000 millimeters
Weight	25t
Color	can be customized
Packing	standard package
Minimum Order	1 set
Payment Term	TT/LC
Warrantly	10 years
Thermal Efficiency	92.4%--94.5%
Certification	ISO9001:2008/ BV

Product Detail

Characteristics and structures of fuel gas or oil boiler
Fuel gas boiler is unlike coal-fired boiler, it will need to use burner to inject fuel into boiler furnace. Oil or gas fired boiler take burning chamber without using grate. As the combustion of fuel gas boiler does not produce ash and slag, so this kind of boiler can be operated without sludge discharge facilities. If oil spraying into furnace mixed with air in a certain range or go out, it would be easy to explode. So the fuel gas boiler always take automatic burning and control systems. The structure of fuel gas boiler is compact, about small boiler, ventilation, water supply, control and auxiliary equipment are all set in a chassis. Large and medium-sized also can be assembled at factory. Main pressure parts and connect ways are mentioned below:
The main pressure parts of fire tube boiler: boiler shell, tube plate, furnace, smoke tube;
The main pressure parts of water tube boiler: steam drum, water wall, boiler tube bundle, coil, header;
The connection ways of fuel gas boiler main pressure parts: mainly for welding, some parts also can be expanded joint;

Combustion characteristics of oil fired boiler:

The oil fuel is a kind of liquid fuel, its boiling point is always lower than the ignition, so the combustion of fuel is always in the gas phrase. Fuel oil become oil droplet after atomizing that spray into the furnace, and then it will be heated by high temperature flue gas in furnace to take gasification. Vaporizable oil mix up with around air to form a flame. Some heat from the burning pass onto oil droplet to make oil droplet gasification and combustion until burnt out. The smaller diameter of oil droplet, the faster burning. Similarly, the required oxygen of oil droplet combustion can be supplied in a timely manner, the oil droplet will be burnt faster also. So strengthen the oil burning must do the following:

Improve the quality of atomization, reduce oil droplet diameter.
Increase the relative velocity of air and oil droplet.
Take the reasonable air distribution.

Combustion characteristics of gas fired boiler

Burning high calorific value of gas will need a large amount of air, to make gas fully burning requires to mix with lots of air. There are no fuel atomization and gasification process in the gas combustion process. The way of mixing with air and gas has great influence on the strength of the combustion, flame length and flame temperature. According to different mixing mode, fuel gas combustion method can be divided into three types:

Diffusion combustion: the combustion method is not mixed in advance, gas and air will take a diffusion in the gas jet and burn. Its advantages are burn stability and burner structure simple, but the flame is to long and prone to incomplete combustion to make heating area carbide.
Take combustion premixed part air:The combustion mode is that mix some air with gas in advance before burning( an excess air coefficient between 0.2-0.8). The advantages are burning flame clear, burning reinforcement, high thermal efficiency. But the combustion is instable and higher requirement for primary air and burning ingredients. Gas burner generally use the combustion mode.
Flameless combustion:The combustion mode require air and gas mixing before burning. The once excess air coefficient is equal to the fuel combustion air surplus coefficient, it does not need to get oxygen from the surrounding air in the process of combustion. When the gas and air mixture reach the combustion zone, it can be burnt out in a flash.

More detail about machine and our factory,u can visit my website" xindaboiler.com"


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.

ID:

Password:

Remember my ID on this computer


	Complete this form below to send out your enquiries. All enquiries will be automatically sent to the company you want to develop.

	Subject
	Content	(Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)

Company Profile:

* Company Name

*E-mail

*Country

*Contact Person

URL

*Phone

- -

Fax

- -

*Postal code

*City

*Street Address

*Business Nature

Distributor Exporter Importer Manufacturer
Whole Sale Retailer Reseller Retrofitter User
Others, please specify:

*Security Code


Enter the security code.