Sign In Join Help
 
Shenzhen Huayansheng Electron Co.,Ltd

 
 
Recommended Results 
 
LED Digital Electricity Energy Meter  

  Category : Electronic and electrical->Electric products->other->energy meter

     
LED Digital Electricity Energy Meter
 
 
       

  Product Specification
 
  Model No:      DEM8900
  Country  CN
  Brand  HYES
  Materials  Plastic
  Size  96*96*78mm    
  Weight  0.5kg
  Color  White
  Minimum Order  10pcs
  Payment Term  T/T in advance

 

    Product Detail
  Product operation description

1.1 Description
DEM8900-1/DEM8900-2/DEM8900-3 (short form for DEM8900) is designed by adopting the updated microprocessor and digital signal processing technology, which can be applied for monitoring the electrical system. DEM8900 can measure and analyze the real time electrical parameters, such as I, kWh, kvarh., Meanwhile, DEM8900 has functions of multi-tariff, RS485 communication ( MODBUS protocol), analog output, remote input and electrical pulse output.
All our instruments fulfill all important requirements and regulations concerning electromagnetic compatibility and safety isolation (IEC61000, IEC1010 standard and EN61010 standard). The devices have been developed, manufactured, and tested in accordance with Quality Assurance System ISO 9001.

1.2 Measured scope
The meter can be applied in secondary measure in high and low voltage electrical system. The measured data can be communication transmitted. It can achieve the function of measuring and analyzing parameters for single phase, 3-Ph 3wire and 3-Ph 4Wire system (include unbalance load).

1.3 Measured parameters
Current: Class 0.2
Active Power: Class 0.5
Reactive Power: Class 0.5
Active Energy: Class 1.0
Reactive Energy: Class 2.0

Note: 1. DEM8900-1 measure current, active energy, active power (optional, with analog output)
2. DEM8900-2 measure current, reactive energy, reactive power (optional, with analog output)
3. DEM8900-3 measure Current, active energy, reactive energy, active/reactive power (optional, with analog output)

Parameter Setup
Meter address: 1 - 247
PT: 1.00 - 99. 00 and 100.0 - 6500.0
CT: 1.0 - 6500.0
RS485 baud rate: 2400 /4800/9600/19200/38400 bps
Pulse Energy Constant: 1- 9600 Passive pulse
Pulse width: 20 - 100 ms
Analog output corresponding: 4 - 20mA or 0 - 5V
Multi-tariff rate: 2 - 12 Interval / alternation time is multiply by 30 minutes

Technical Specification

Current Input
Current Input: 5A (Current value can be set up)
Measurement scope: 0.5%~120% In
Overload capacity: 2 X rated continuously, 100A/1s non continuously
Power consumption: less than 0.2 VA per phase

Voltage Input
Voltage Input: 400VAC (phase voltage), 693VAC (wire voltage) (Voltage value can be set up)
System frequency: 45~65Hz
Measurement Scope: 3%~120% Un
Overload capacity: 2 X rated continuously, 2500V/1s non continuously
Power consumption: less than 0.5VA per phase

Remote Input (optional)
Input channel: 1channel
Input mode: Dry contact
Isolated Voltage: 2500VAC

Analog Output (optional)
Output channel: 1 channel programmable
Output signal: 4~20mA or 0~5V (optional)
Response time: less than400ms
Isolated Voltage: 2000VAC
Pulse Output
Output channel: 2 channel (active/reactive energy each without power)

Serial Communication Interface (optional)
Channels of output: 1 channel RS-485 interface
Communication protocol: Modbus-RTU protocol
Baud rate: 2400, 4800, 9600, 1920, 38400 bps

Multi-tariff function (optional)
Interval number: 2 - 12 (The ending interval can cross 0:00)
Interval longth: a multiply of 30 minutes
Multi-tariff rate type: sharp, peak, flat, valley

Other parameters
Auxiliary power: 85~265VAC/DC (30VDC is optional; 2 is “+” terminal and 1 is “-” terminal when use DC power)
Display type: LED display
Temp. drifting factor: <100PPM/ celsius degree
Withstand voltage (Input against output): 2500V/1 min
Total power consumption: <6VA
Operation temperature: -20~60 celsius degree
Storage temperature: -40~85 celsius degree
Operation humidity: 5~95%RH
Pollution class: Class 2
Material of housing: Flammability acc. to UL94V0
Protection class: IP 30
Dimensional size: 96 mm × 96 mm × 78mm
Installation size: 91 x 91mm

EMC and Safety standard
IEC61000-4-2 (GB/T17626.2)
IEC61000-4-8 (GB/T17626.8)
IEC61000-4-4 (GB/T17626.4)
IEC61010-1 (GB/T4793.1)

   


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.
 
ID: Password: Remember my ID on this computer
Complete this form below to send out your enquiries.
All enquiries will be automatically sent to the company you want to develop.
Subject
Content (Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)
   

 


Company Profile:
* Company Name
*E-mail
*Country
*Contact Person
URL
*Phone
 - -
Fax
 - -
*Postal code
*City
*Street Address
*Business Nature
 Distributor   Exporter Importer Manufacturer
Whole Sale Retailer  Reseller Retrofitter User
Others, please specify:
*Security Code
Enter the security code.


Site Map l   Privacy Policy l Company Profile l Corporate Proposal l Contact Us l Help l Advertise With Us l  World Trade Link
    .