Wire rope for aviation->automobile tools

Join

Help

Suqian Kasen metal products Co., Ltd.

Home

	Recommended Results

Wire rope for aviation

Category :

Machinery on-line->Hardware & Hand tool->Others->automobile tools

Product Specification

Model No:	7*19

Country	CN
Brand	凯盛
Materials	60#
Size	60*60 centimeters
Weight	59
Color	银色
Packing	木盘
Minimum Order	10
Payment Term	TT

Product Detail

Aeronautical wire rope
The [1] is mainly used to control the rudder, the aileron, the engine, the landing gear, the compass needle and so on. Air wire rope has a higher performance requirement than ordinary steel wire rope because of its special environment, safe and reliable use and long time use. For example, the tensile strength needs to be above 1865MPa, and the fatigue test under different tension is required on the basis of structure and specifications. After the fatigue test, the wear part should have enough strength, that is, breaking tension (see wire rope inspection) can not be less than 50% of the broken tensile force specified by the wire rope. The aeronautical wire rope also requires high corrosion resistance. For example, a jet plane flying at a height of 10 thousand meters, its 90% flight time is at minus 50 degrees. When landing in the atmosphere, the temperature changes very fast, and dew often appears on the surface of the wire rope. In addition, when the brake is down, the engine will pour smoke through the aileron, the auxiliary wing and the vertical rudder, which will strongly corrode and pollute the wire rope. The varieties of air wire rope are single strand wire rope, organic core wire rope and metal core wire rope. The typical structures are 1 * 7, 1 * 19, 6 * 7+IWS, 6 * 19+IWS, 6 * 7+NF, 6 x 19+NF, etc. The raw materials used for the air wire rope are galvanized steel wire and stainless steel wire for carbon structural steel. The coating of galvanized steel wire should be uniform, no crack and exfoliation. After passing the inspection, the raw materials are closely and neatly wrapped up on the specified I-wheel according to the technological requirements, and put on the strands, and then close the rope on the rope closer. The twist direction (see wire rope twisting) except the single strand is left twisting, all right twisting. The core of the rope is usually made of cotton or hemp, soaked in neutral oil or used in metal core. The distance of the wire rope should be 6 to 8 times the diameter of the rope, and the length of the wire in the rope and single strand should not exceed 12 times the diameter of the wire. The distance between the rope strands and the distance of the steel wire should be uniform on the length of the wire. The diameter of the central wire of the rope strands should be thickened. The twisted rope should also be tempered at low temperature with oil as a tempering medium to eliminate the twisting stress of the wire rope and further remove the hydrogen in the galvanized steel wire, so as to improve the fatigue resistance and breaking force of the aviation wire rope.


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.

ID:

Password:

Remember my ID on this computer


	Complete this form below to send out your enquiries. All enquiries will be automatically sent to the company you want to develop.

	Subject
	Content	(Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)

Company Profile:

* Company Name

*E-mail

*Country

*Contact Person

URL

*Phone

- -

Fax

- -

*Postal code

*City

*Street Address

*Business Nature

Distributor Exporter Importer Manufacturer
Whole Sale Retailer Reseller Retrofitter User
Others, please specify:

*Security Code


Enter the security code.