Aluminum Die Casting Backbone->fitness equipments

Join

Help

NINGBOZHENHAIBOLANGMETALPRODUCTFACTORY

	Recommended Results

Aluminum Die Casting Backbone

Category :

Sports and leisure->Fitness->fitness equipments

Product Specification

Model No:	319436

Country	CN
Brand	NONE
Packing	carton, pallet, PE pallet, steel box, plastic flow box
Minimum Order	3000
Payment Term	T/T

Product Detail

The Aluminum Die Casting Backbone , it is an customized auto part, it is produced by high pressure die casting process, the part is small, the part weight is only about 35 gram, but the length of the part is about 15 cm. what's more, on one end, the part has a feature of cavity, leading to the only option to be realized by secondary slide. in this case, the injection gate can only be on the other end in terms of the geometry. Because the length of the part is long, the part will have potential failure on casting defect, such as internal porosity, chilled layer on the part surface, cold shut, cold flow, and loose grain structure etc. The part has requirement of minimum tensile strength of 300 N*m.  According to the structure of the part, based on your assessment, the part may have potential failure possibility of fracture at the thickest area. It is because the part is long, in order to have an adequate filling, the pressure to inject the melting aluminum into the mold cavity should be very large so that the material won't solid prior to fully fill the cavity. But as the injection gate section area is not big enough, we make modification or adjustment to the gate to ensure the filling reach well.


The part is small,  the projection area also is small, theoretically, the tonnage of 200 t is supposed to satisfy the shot of the die casting. By our PQ chart analysis, we learned that the section area of the injection gate should be larger, almost the whole surface of the end of the part.  In this case, the residual of the gate should be removed by machining.


The part has strict density requirement, so the tooling design, including the injection gate, cross injection gate, the runner, the venting system locations should be fully considered.


At last, the part have a through hole vertical to the joint line. which require the drilling work. The machining work is finished on the machining center, as 4 cavities on the mold, the machining fixture, also have 4 clamping station for 4 parts per cycle of machining.    


Material: ADC-12 
Cavity Number: 4 
Process Technology: High pressure die casting 
Product Dimensions: Customized 
Casting General Tolerance: Grade GB-CT4 
Surface Finish: Polishing, Shot Peening 
Flow Processes: Die casting, Trimming, Deburring, Shot Blasting, Machining, Cleaning, Packing, Shipping 
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection,  and Outgoing quality control 
Inspection Equipment: CMM, Caliper, Plug Gage 
Application: Auto Parts 
Certificate: ISO/TS16949:2009 
Lead Time: 30-35 days 
Trade Term: FOB Ningbo 
 
<img src="http://i.bosscdn.com/product/a8/11/ea/643330c98d01b33c85c9acf819.jpg" title="BOLANG PLANT" alt="BOLANG PLANT" width="700" height="467" /><img src="http://i.bosscdn.com/product/7e/e9/06/e87dc0b78149df411448510f40.jpg" title="DIE CASTING MACHINE" alt="DIE CASTING MACHINE" width="700" height="467" />


<img src="http://i.bosscdn.com/product/04/0a/bf/0fd808abcf9e64d37f33cd23f8.jpg" title="CNC work shop" alt="CNC work shop" width="700" height="467" />


 


<img src="http://i.bosscdn.com/product/61/63/e8/787c0ea89fd1e735521c8fc7a3.jpg" title="CMM facility" alt="CMM facility" width="700" height="467" />
blcastings.com

More Products from this Supplier

Customized auto gearbox cnc parts

Aluminum and Steel Alloy Auto CNC Housing

Aluminum Die Casting Tractor Engine Cover

Customized High Quality Aluminum Die Casting Machine Parts


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.

ID:

Password:

Remember my ID on this computer


	Complete this form below to send out your enquiries. All enquiries will be automatically sent to the company you want to develop.

	Subject
	Content	(Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)

Company Profile:

* Company Name

*E-mail

*Country

*Contact Person

URL

*Phone

- -

Fax

- -

*Postal code

*City

*Street Address

*Business Nature

Distributor Exporter Importer Manufacturer
Whole Sale Retailer Reseller Retrofitter User
Others, please specify:

*Security Code


Enter the security code.