Customized Base Machined Parts CNC Machining->fitness equipments

Join

Help

NINGBOZHENHAIBOLANGMETALPRODUCTFACTORY

	Recommended Results

Customized Base Machined Parts CNC Machining

Category :

Sports and leisure->Fitness->fitness equipments

Customized Base Machined Parts CNC Machining

Product Specification

Model No:	BL019

Country	CN
Brand	NONE
Packing	carton, PE pallet, PE flow box, steel box, wooden pallet, container
Minimum Order	4000
Payment Term	T/T

Product Detail

Customized Base Machined Parts CNC Machining , 


 



the material for this part is ADC-12, a kind of material, having good fluidity, which is good for filling while die casting. This material is a good material to produce end cover, housing, gearbox, bracket etc. 


 



For this part, should pay attention to the loose.


Feature: loose and non tight macrostructure on the surface of casting.


 
Causes 
1, mold temperature is too low. 
2. The casting temperature is too low. 
3, small specific pressure. 
4, too much paint.


 
Exclusion measures


 
1, to improve the mold temperature to the working temperature. 
2. Appropriately increase the pouring temperature of alloy. 
3, increase the specific pressure. 
4, the coating is thin and uniform. 
 



Die Casting is a technology that, press the melting aluminum under high pressure, high speed, usually the shot procedure will be finished in a few seconds. In this case, there probably be air trapped because of turbulence, eddy, so the porosity is unavoidable, but can be decreased or improved. Usually, in die casting factory, visual porosity on machining surface is not allowed, so the solution is to simulate or validate sufficiently by mold flow analysis prior to the building of the tooling, to ensure the density of the casting, by locating the major injection gate, cross gate, runner, the venting system reasonably. 


 



Then, for the machining work of this part, it is a part of high precision machining tolerance, the tolerance is around ±0.025 mm, so for the machining facility, machining cutter, they should be rigid, stable enough. In production, there should be first article inspection, final article inspection, routine inspection during process flow, including definite inspection frequency. Of course, because of the limit of the qty of inspector, the more important point is that, the operator should make self inspection during machining work. 


 



Material: ADC-12 
Cavity Number: 2 
Process Technology: High pressure die casting, Cold Chamber 
Product Dimensions: Customized 
Casting General Tolerance: Grade GB-CT4 
Surface Finish: Polishing, Shot Peening 
Flow Processes: Die casting, Degating, Deburring to remove the flash around the ejector pins, Polishing to remove the parting line, Shot peening to make the part more consistency, High Precision CNC Lathe Machining, E-coating, Cleaning, Packaging, Shipping 
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection,  and Outgoing quality control 
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge 
Application: Auto Parts 
Certificate: ISO/TS16949:2009 
Lead Time: 30-35 days 
Trade Term: FOB Ningbo 
 
<img src="http://i.bosscdn.com/product/a8/11/ea/643330c98d01b33c85c9acf819.jpg" title="BOLANG PLANT" alt="BOLANG PLANT" width="700" height="467" /><img src="http://i.bosscdn.com/product/7e/e9/06/e87dc0b78149df411448510f40.jpg" title="DIE CASTING MACHINE" alt="DIE CASTING MACHINE" width="700" height="467" />


<img src="http://i.bosscdn.com/product/04/0a/bf/0fd808abcf9e64d37f33cd23f8.jpg" title="CNC work shop" alt="CNC work shop" width="700" height="467" />


 


<img src="http://i.bosscdn.com/product/61/63/e8/787c0ea89fd1e735521c8fc7a3.jpg" title="CMM facility" alt="CMM facility" width="700" height="467" />
blcastings.com

More Products from this Supplier

aluminum alloy die casting hanger bracket

Customized Zinc Alloy Die Casting for Lock Set

Aluminum Die Casting Wiper Motor Housing

Customized Machining Parts Precision CNC Machining Parts


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.

ID:

Password:

Remember my ID on this computer


	Complete this form below to send out your enquiries. All enquiries will be automatically sent to the company you want to develop.

	Subject
	Content	(Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)

Company Profile:

* Company Name

*E-mail

*Country

*Contact Person

URL

*Phone

- -

Fax

- -

*Postal code

*City

*Street Address

*Business Nature

Distributor Exporter Importer Manufacturer
Whole Sale Retailer Reseller Retrofitter User
Others, please specify:

*Security Code


Enter the security code.