UV Laser Drilling Machine JG23
Laser Drilling Machine
Usage
The machine is used in drilling though holes and blind holes of FPC flexible printed circuit board cover layer,rigid and flexible circuit..
Feature
(1)High efficiency
Flying drilling technology, table and galvanometer with linkages are applied in machine to improve blind/through holes production.
(2)High quality
Adopting imported laser, high-performance galvanometer, higher pulse frequency, higher power peak, more fine cutting path planning.
(3)Auto
There are functions with automatically precision correction, auto power compesation, auto focus and automatic correcting movement and high interactivity.
(4)Customized
Custom-made 250 mm or 500 mm wide RTR automatic loading system and various kinds of software functions.
(5)Security
Following standard to design and produce machine, to achieve better quality in every steps, long work time without any downtime.
(6)Stability:
Following standard to design and produce machine, to achieve better quality in every steps, long work time without any downtime.
(7)Reliability
AOM module is applied to correct power by single pulse sampling, to make drilling quality consistency and reliability.
Parametres
Specification of UV Laser Drilling Machine (ASIDA JG23)
MODEL ASIDA JG23
System Processing Accuracy ( ZHENGYE Conditions) ±20μm
Drilling Speed (ZHENGYE Conditions) ≥200 hole per second
Roundness ≥95%
Differences Between Up and Down Hole Diameter ≤12.5μm
Objects Maximum Processing Size 540mmX650mm
Processing Capacity Blind hoe drilling, PTH cutting，BTH cutting
Minimum Processing Hole Diameter 50μm
Laser Wavelength 355 nm
Pressured Air >0.6MPa;500L per minute
Exhaust 30KPa,8.6CMM
Power Supply 3- phase, 380V,60Hz, 3.5KW
Dimensions (L×W×H) 1610mmx1864mmx1934mm
Weight 2200kg
