[CN] fully automatic pu footwear insole and outsole making machine Apr 11, 2024
fully automatic pu footwear insole and outsole making machine
PRODUCT APPLICATION
This polyurethane Foaming machine with mould carrier line can produce various twin-color and single-color polyurethane insoles, outsoles. The mold injection is automatic controlled.
Why choose it:
1. Imported components are used for the metering pump and electrical components, greatly enhancing equipment running reliability and service life.
2. The moulds can be opened and closed automatically by the pneumatic system which can save the labor cost.
3. The molds are heated by circulating water heating system, it can save 3/2 electricity as the traditional way, and the temperature of the molds are stabler.
TECHNICAL DETAILS
Item Name: LZ-XC905 triple-components foaming machine
All power of the machine 12KW,4*380V/60HZ
The type of applicable foam:Sole,insole, walking shoe, etc.
Flux of inject:30g-100g/S (Attention:the flux could be configured)
The press of infect:0.1MPA-3.99MPA
The mix proportion:100-65;100-110
Viscosity(22°) POLY( polyethylene )500-2000MPAS ISO( Multi-isocyanate )500-2000MPAS
Time of injecting:0.01-9.99/S( precision 0.01S)
Precision of injection:0.1/100
Process of injecting:Manual inject by PLC programmed
Pneumatic pressure:0.6-0.8MPa
Dimension:Wide:2.1M; High:2.35M; Long:3.5M
Weight of the machine:1.5ton
Pouring nozzle:With collision impact needle, Never wear, Never plug
PLC Programmed computer(English demonstration)
It could control 100 patterns’ capacity of injecting at the same time and could wash the Gas-injecting automatically
heat system:It can automatic control temperature
Turntable production line
Total power:22kw
Pneumatic mold station: 100, 120, 160 for choose.
Material for work station:3mm, iron plate
Water heating box:150L,304 stainless steel,18KW
Water-circulating pige:With joints
Line height(without mould):750mm
Driving Motor:3kw
Transducer:1 set
Diameter for production line:About 8 meter
