Sign In Join Help
 
Guoguang green energy lighting technology Co., Ltd. (Beijing)

 
 
Recommended Results 
 
LED Tube 

  Category : Electronic and electrical->Household appliances->lamps

     
       

  Product Specification
 
  Model No:      GGLN-1

 

    Product Detail
  Product Features:
Energy-saving lights saving T5/T8/T10 1024/5050/3528T5LED of Power Consumption 20W or less, while a traditional energy-saving fluorescent tubes consume power 38W-45W, LED lighting than traditional energy sources in more than 60%. 2, low-light failure
The company developed the decline of high-brightness, low light lens type 3528LED light source 10,000 hours less than 30% of the light failure
3, high brightness
Mining for the Division I developed floodlight coating, the light efficiency of 105-110 lumens per watt.
4, environmentally friendly LED light source emits light without ultraviolet light, infrared light and other radiation inside the lamp no mercury and other harmful substances, harmful substances containing mercury conventional light sources.
5, long life the lens type 3528LED light source lighting the lamp life up to 20,000 hours, 8 hours per day, can be used for more than 6.8 years. The traditional source of life is generally not more than 6,000 hours.
6, eye protection
LED fluorescent lamp, using a constant current power supply DC power supply, no strobe light emitted from the light source, and will not hurt your eyes. Traditional fluorescent lamps have strobe.
7, the seismic performance
LED is a solid-state light sources, seismic performance, not like the traditional fluorescent fragile.
The scope of products: 1, factory assembly line: LED fluorescent tube in full compliance with the general production of the national standard (GB50034-92) illuminance of 100-200 lux (Lux) requirements, does not require maintenance, compared to traditional fluorescent tube staff's eyes and body is a kind of protection. 2, supermarkets, shopping malls (especially the freezer): no infrared, no heat, environmental protection. Color is good, to restore the true color of goods, commodities in the LED light source does not heat. 3, schools, office space: safe and reliable, no flicker, soft light and pure, relieve visual fatigue and eye protection. No UV, no harm to human skin. 4, hospitals, municipal buildings, plazas, parking lots: the place to use for a long time lighting place and difficult to maintain an absolute bargain.
Installation instructions:
1, the installation of the product must be a licensed professional electrician;
Come from the box to check the integrity of the product;
Products and flammable materials to ensure a distance of at least 0.2m, to ensure that is installed zenith gap of 2 cm high, lighting can not be installed in all;
Zenith inside, or the heat source of the wall, and to pay attention to the low-voltage and high-voltage connections routed separately;
4, the lighting on the connection from the borehole through access to electricity and lighting behind the connection clamp fixed to ensure fixed firmly;
5, to have sufficient length to ensure that the power cord of the lamp, not by tension or tangential force. Connection of lamps installed to avoid excessive tension, do not make the connection knot. Output connection is important to distinguish between, and other fixtures should not be confused;
6, non-professionals shall not carry out the demolition, repair, our company has the right to dismantle, repair the product does not give replacement or warranty service;
Note:
1 can only be used outside of the package.
Be confirmed with the product is damaged in transit, if damaged will not be able to install and use.
Do not attempt to repair, only to be repaired by a professional engineer.
4, the material away from children, prevent child swallowed product small accessories, not to allow children access to live equipment.
5, long look directly at the light emitting surface of the LED, do not use the reflection of the LED light irradiated others eyes.
6, away from open flames or hot objects.
7, over the period of use, the need to re-maintenance check, or end-of-life treatment.
Maintenance matters:
1, before cleaning lamps, please be sure to turn off the power.
2, dry or dry cloth to clean it.
Do not use chemical or corrosive stuff to clean.
4, left the room, turning off lights, in order to maintain the life of the LED.

   


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.
 
ID: Password: Remember my ID on this computer
Complete this form below to send out your enquiries.
All enquiries will be automatically sent to the company you want to develop.
Subject
Content (Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)
   

 


Company Profile:
* Company Name
*E-mail
*Country
*Contact Person
URL
*Phone
- -
Fax
- -
*Postal code
*City
*Street Address
*Business Nature
Distributor   Exporter Importer Manufacturer
Whole Sale Retailer  Reseller Retrofitter User
Others, please specify:
*Security Code
Enter the security code.


Site Map l   Privacy Policy l Company Profile l Corporate Proposal l Contact Us l Help l Advertise With Us l  World Trade Link
    .