power tack->self adhesives

Join

Help

Shanghai Chasteness Industrial Co.,Ltd

	Recommended Results

power tack

Category :

Office supplies->Stationery->self adhesives

Product Specification

Model No:	pt-100

Country	CN
Brand	chasteness
Weight	100G
Color	blue/white/yellow
Minimum Order	10000sets
Payment Term	T/T

Product Detail

Power tack will stick anything to anything as long as the surface are clean and dry. P-T will not leave holes or messy residues ,as will tacks or stick tape .P-T will not harden, and can be used over and over. P-T is not affected by normal temperature variations, or is it soluble in water ,or in any way affected by moisture. P-T contains no silicones and is non-toxic. You will find many applications where P-T will work better than other adhesives or fastening devices .H

DIRECTIONS

1. To activate power tack , pull it like taffy until it is warm.

2. Pull off a suitable piece and gently roll it into a ball .

3. Place the ball of power tack between the surfaces you want to fasten and P-R-E-S-S HARD.

4. To remove power tack, gently pull it away, or roll it off with the forefinger and save for re-use.

For perfect results ,do not deviate form the above procedure ,and repeat this process every time P-T is used .and remember , DO NOT SKIMP! Always use more than enough P-T to do the job because P-T is 100% re-usable . It won`t cost you any more to do the job right.

NOTICE

Power tack is not intended to replace nails or hooks or other devices or adhesives used to hang or attach large or heavy objects.P-T should not be used where paint and wallpaper are not tight on the wall .P-T should always not be used on fresh paint or on soft wallpaper. P-T should always be remove from paper by rolling it off with the forefinger. On some types of paint and wallpaper ,P-T might leave a spot .Normally ,such spots can be easily removed by using lighter fluid ,or a household solvent such as tri-chloroethane. However ,before using on wallpaper flat paint, we suggest placing a small piece of P-T on a inconspicuous spot for a period of about one week .If a mark does not appear by the end of this time ,normally P-T can be used safely .If particles of P-T should remain embedded in concrete ,cinder block, brick ,etc., remove by dabbing the area with a larger piece of well activated P-T ,or use lighter fluid or solvent.


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.

ID:

Password:

Remember my ID on this computer


	Complete this form below to send out your enquiries. All enquiries will be automatically sent to the company you want to develop.

	Subject
	Content	(Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)

Company Profile:

* Company Name

*E-mail

*Country

*Contact Person

URL

*Phone

- -

Fax

- -

*Postal code

*City

*Street Address

*Business Nature

Distributor Exporter Importer Manufacturer
Whole Sale Retailer Reseller Retrofitter User
Others, please specify:

*Security Code


Enter the security code.